Quote:
Originally Posted by Trojan_SC
NO WAY you need 14 anything. I had Euros on my base FR-S. All you need to do is Re-pin the headlight into a 6-pin connector properly (leaving the DRL wireout. GT86 headlights have 7 wires/pins versus base model with 6 wires/pins. Once you properly re-pin the lights to work with the 6-pin harness, you just have to create 2 single-pin connectors for the DRL wires. connect to headlight DRL pins, then the other end needs to tap into the stock DRL power wire (near the DRL resistor) discard OEM resistor.
|
Yes this is if you are NOT making an adapter and re-pinning. I’m sure terminals can be found in Digi-Key online for cheap. Just need to know which terminal to use.
But.. I’ve ordered the connectors and think I’ll change to 8 pin connector because of more wire slack to use just in case I F up. (re-pin 6 connector end to 8)