Once the snow really started to fall I jacked up the BRZ in the garage and started to go at it. I followed the coil-over install guide here:
http://www.ft86club.com/forums/showthread.php?t=12864 with a few exceptions and I’ll discuss those below. The most time consuming and tedious portion of the job besides getting the car on jack stands and wheels off are these end links! Most review just gloss over the fact that these 17mm bolts rotate and most folks just have the little cheap 6mm allen keys lying around. So. I bought a allen key socket and a 17mm wrench and it made life MUCH easier, it just takes a while to get that off…
Most review just gloss over the fact that these 17mm bolts rotate and most folks just have the little cheap 6mm allen keys lying around. So. I bought a allen key socket and a 17mm wrench and it made life MUCH easier, it just takes a while to get that off…
