View Single Post
Old 11-06-2017, 09:42 PM   #18
tato.valverde
Senior Member
 
tato.valverde's Avatar
 
Join Date: Oct 2014
Drives: Scion FRS RS1.0,Mazda MX-6 2.5i 4WS
Location: Chicago, IL / Madrid, Spain
Posts: 170
Thanks: 260
Thanked 110 Times in 48 Posts
Mentioned: 4 Post(s)
Tagged: 1 Thread(s)
Quote:
Originally Posted by fuxo View Post
Hi tato.valverde so does your setup separates v from triangle and triangle serves as and is on when fog light is on right? I need to do the same setup as i am from Europe and need to have a separate fog light. Any other wiring needed to be run from Fuse box as you were mentioning previously? What about wires setup in trunk? Still need to connect the red and blue to the tail lights? Thanks.
Correct, i did my own re-wiring "design" because I'm moving to Spain and I will need a rear fog light there.

On my case, my U.S. spec FRS didn't come with any wiring for the fog lights, or no switch or anything, so I bought a switch and ran a wire all the way to the Valenti light, which you can see on the picture. On your case, since the wiring is already there, you can just run that wire into the Valenti (presumably the middle wire of the 3 wires on the connector under the trunk lip) and have it working with the stock fog light switch and wiring =)
tato.valverde is offline   Reply With Quote