Hello everyone im 24, from Canada and here is my build!
I took delivery of the car in february 2017 and started moding it the first day I got her.
8 months and 18 000kms later here is what Ive done to the car so far.
First thing first the car needed some tints! I would have like to go darker but here in Quebec theres a law against window tint.
The second mod I did was the front splitter (Starstruck Aero x Aero Blitz) because I thought the kouki 86 needed some more agressiveness up front
And then one of my dream since i was kid was to have a big wing on one of my car, the 86 was IMO the perfect car to wear it
so I got the Battle Aero wing. It made a huge difference on the highway the car feels a lot more stables and very planted to the road.
After that i thought my car needed to be more loud and have a little bit more power, i really hated the torque dip so, i got a Gruppe s uel ceramic coated header, Gruppe s overpipe, Invidia catless resonated front pipe, a Invidia N1 catback and a Grimmspeed intake.
After that we all knew i was going to get a CEL because of the catless life... I didnt want an openflash tablet so i went to Lachute performance and got a dyno tune with Ecutek. Dont mind the yellow stripes i was only doing a test to see if i liked the idea to have a touch of color on the car.. a week later they were gone
Then i needed a new set of lightweight wheels so i got some 720form gtf1 in 17x9+35 wrapped in nitto invos 245/40, but before i put the new wheels on...
And then the new wheels..
I now wanted to lower the car so i bought a set of used Stance xr1 coilovers but unfortunately the rebound adjustement knob up front were broken so i returned the suspension to the guy and i placed an order for some Fortune auto 500 gen 6. But here is some pics lowered..
As you can see I got a side splitter by Starstruck aero and a HIC roof visor. Also i tinted my headlights and installed a matte black banner.
Fourth GCS brake light
A little DIY i did.. weight reduction broo..
29/11/2017 update:
My car is in the storage for the winter
however I
added a tow hook up front, got it off ebay and surprisingly the quality is very decent, suits the car style very well, also i always wanted the trd aero fins and finallu pulled the trigger.
They are colormatched and the install was a breeze.
UPDATE 28/12/2017: got around to install the Radoum pcv catch can and master cylinder brace
UPDATE 2019/03/17
So I totally changed the orientation of what I wanted to do with my car, since i have no time for track or autocross bevause im too buzy, i decided to ruin it lol
Its now widebody, slammed, has tilty wheels and a skibox
So here is what ive done so far :
Grimmspeed intake
Gruppe s uel ceramic coated headers
Gruppe s overpipe
ACE front pipe
Perrin 3" resonated catback
Ecutek tune
Whiteline diff bushing
Whiteline tranny mount
Whiteline rear subframe bushing
IRP short shifter
Rocket bunny V1 kit
Seibon carbon trunk
Helix depot tail lights
Fog lights
Matte black windshield banner
Wrapped interior trim matte black
Shift knob
Rear seat delete
HIC roof visor
TRD aero fender fins
Tow hook
Braum venom r seat
Wheels and tires
WatercooledIND JB1 fully brushed 18x10.5 -12
15mm spacer front 40mm spacer rear
225/35 nankang ns2
Fortune auto 500 gen6 DSG edition 30k spring rate with out of system camber plate
PBM lca
Whiteline camber bolt
Radium oil catch can and master cylinder brace
Custom oil cooler
Window visor
Velox hood louver
Grimmspeed strut bar
Sea sucker and thule alpine pulse skibox
Too lazy to post pic of hiw it looks actually but heres a video with my old setup