Quote:
Originally Posted by strat61caster
In OP's case I suspect a ride height that is too low is causing excessive bump stop usage which means the effective spring rate is too stiff for the damper, softening the damper just makes it bouncier.
|
Agreed.
With coils that adjust height from the bottom, using preload to adjust ride height is a common symptom. "But I'm not that low!" Because preload non-existent and the strut body is barely in the mount at all.
It's either a ride height issue, or a setup issue I bet. (Wrong end of the coilover is being played with...)
__________________
SOLD: 2015 WRB BRZ Limited ('02 WRX BBS, S-04's, Stoptech Sport pads, MXP SP, AVO drop in filter, Mishimoto Intake tube, decatted header, OFT 93 Stage 2 EL Tune, Kartboy rear shifter bushing, Whiteline transmission and subframe lockout bushings, ST Coilovers, SPC Camber bolts w/smaller crash bolt, SPC LCA's & SPC Toe Arm bushings, Red TOMs, TRD Wing.)
|