Quote:
Originally Posted by strat61caster
imo switch to using an impact driver, mine did the same, $50 corded impact driver from harbor freight is perfect for automotive jobs if you don't go HAM with it.
If you must have them fixed your best bet is to just send them down to Bilstein in Poway, the only other shop I know that might fix it is PSI in Sonoma but they may be distracted at the moment and likely charge more than Bilstein US to do the exact same job. Which will likely be to just replace the damper body, if not the whole damper, and charge you accordingly.
I'm trying to find a link to Bilstein US service but they've "upgraded" their website and it's damn near impossible now...
A machine shop may be able to do something for you, but I don't know what they would attempt or how well it would work. jmho switch to using an impact. |
For some reason it's only the driver side top nut that been giving me issues. The threads are fine on both the strut and the nut and I only had it slightly over hand tighten, but it seems like its impossible to unscrew. Didn't want to also spin the strut.
I contacted both PSI and Bilstein already. PSI quoted me half the cost of a brand new set of B14's. Bilstein has a $50 evaluation fee and depending on what they need to do, will add up. Bilstein also has a 8 week turn around time atm.
Just looking at options that are in the bay area so I can avoid shipping it as well as possibly having it done on the same day. Or else I would have to slap on the stock suspension if it gets shipped out and re-do my alignment as it's my DD.