So the gorilla tape kind of melts and turns real gooey when the temperature gets too hot... So I went back to 3M an low and behold the marker had stayed in place despite a ridiculous amount of jolts and jumps (pot holes / crappy north NJ speed bumps, etc.)... I think the trick this time was that I 1) more thoroughly cleaned the area and 2) cut the tape using a straight razor so it exactly fit the side marker...
I have to get around to doing the other side marker like this now...
Quote:
Originally Posted by FirstWinter
I just use 3M double sided tape. I just replace it if it starts to come loose or I have to do work with the bumper off. Been thinking about drilling a hole and using safety wire or cutting up some command strips so I just velcro it.
|
Command strips (not sure if I'll go with the velcro or sticky type) were going to be my next option. Once this tape stops holding I'll give them a try.