Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

ermax · 09-29-2017, 10:49 AM

Does anyone have working addresses for B01C for these functions:
gear
brake force
steering angle
fuel level

Also, is there anyway to read the tire pressures and temps? I've never seen any talk of this or even any interest in this.

Also, is it just me or do triggers not work at all? It just seems to randomly start and stop the logs. I thought it was because the Tactrix wasn't connected firmly so I added a rubber band and it still just randomly logs. I would like to use the defogger but it isn't working. I do see the defogger in my log so I know I have the right address set for the defogger but it isn't starting or stopping when I press it. Here is a sample:

Code:

type = obd
protocolid = 6
mode23txaddrwidth = 4
mode23txlenwidth = 1
mode23rxaddrwidth = 0
mode23uds = 1
sortpids = 1
calcsampinterval = 1000

paramname = rpm
paramid = 0xFFF89570
isfloat = 1	

paramname = defogger_sw
paramid = 0xFFF8939F
databits = 8
isvisible = 1

conditionrpn = defogger_sw,1,==
action = start
conditionrpn = defogger_sw,0,==
action = stop

Sorry if these are dumb questions. I just got the car two weeks ago and the Tactrix on Wednesday.

09-29-2017, 10:49 AM	#33
ermax Senior Member Join Date: Sep 2017 Drives: 2022 BRZ Limited Silver Location: Jacksonville, FL Posts: 2,533 Thanks: 883 Thanked 2,049 Times in 1,191 Posts Mentioned: 68 Post(s) Tagged: 0 Thread(s)	Does anyone have working addresses for B01C for these functions: gear brake force steering angle fuel level Also, is there anyway to read the tire pressures and temps? I've never seen any talk of this or even any interest in this. Also, is it just me or do triggers not work at all? It just seems to randomly start and stop the logs. I thought it was because the Tactrix wasn't connected firmly so I added a rubber band and it still just randomly logs. I would like to use the defogger but it isn't working. I do see the defogger in my log so I know I have the right address set for the defogger but it isn't starting or stopping when I press it. Here is a sample: Code: type = obd protocolid = 6 mode23txaddrwidth = 4 mode23txlenwidth = 1 mode23rxaddrwidth = 0 mode23uds = 1 sortpids = 1 calcsampinterval = 1000 paramname = rpm paramid = 0xFFF89570 isfloat = 1 paramname = defogger_sw paramid = 0xFFF8939F databits = 8 isvisible = 1 conditionrpn = defogger_sw,1,== action = start conditionrpn = defogger_sw,0,== action = stop Sorry if these are dumb questions. I just got the car two weeks ago and the Tactrix on Wednesday.