|
86Speed doesn't open til 10am so hoping to get some help on here.
Installed JDM Tom's last night, but they were labeled plug and play so I believe they were the repined set. Installed the flasher relay (couldn't pry the old one loose so just zip tied the new on hanging down, but it is connected and secure).
Now when I use my turn signal I get 3 things:
1) both the inner and outer portion of the side I'm signaling on flash
2) the outer ring (tail/brake light) on the opposite side flashes
3) headunit flashes
Is this is a pin issue or maybe a faulty relay? Any other ideas?
TIA
__________________
 
"Just like how a strut bar somehow enables you to corner 20MPH faster around a cloverleaf on-ramp, when the reality is, you can do it already but you just don't have to balls to do it." - CSG David |