Hummm
90 degree ? I had to use -10 45's on my sandwich plate due to clearance issues.
And no banjos because reduced flow in that type of fitting.
https://imgur.com/tozxmMW
Old pic pre newer mods but still same oil lines
__________________
Edelbrock SC kit w/ ECUtek tune, Oil Cooler, UEL catted header, Perrin 2.5 Overpipe n Catted midpipe, 3.0 Catback resonated (all exhst ceramic coated), TRD short shifter, MTEC clutch n trans springs, Trans: Pentosin MTF2, Diff: Motul 75W90, Whiteline trans bushing, 3/4" clutch slave cyl., Ferodo DS2500 pads w/Motul 600 fluid, 17x8 wheels n 235/45ZR-17 tires
Last edited by BuffDriver; 09-17-2017 at 08:22 PM.
|