Quote:
Originally Posted by Spuds
Did you turn off the ignition, unplug the oft, then plug it in again to see if the write options are available? The vid was probably made with an early version of the software, and some of the GUIs and prompts may have changed. I think when I first set mine up it was a bit different.
Also, you said you deleted the file with the manager, but as I understand it, you should not be able to delete the original that it downloaded from the ECU. That gets stored permanently until you unmarry the oft from the car.
|
I tried doing what it said with no luck. Once I erased it on manager it gave me back the Read icon and was able to perform the Read process over again with the same end result! Its really pissing me off to be honest! I'm a powersports Tech and run my own Small engine performance machine shop. Ive worked with DynoJet, Bazzaz and other ECU tuning companies so Im not unfamiliar with this type of stuff but this Annoying. Ive had to Reflash ECU's for stuff before but not a open flash platform like this.
