Quote:
Originally Posted by BRX
Just delete it and block the hoses. With it disconnected it becomes obsolete anyway since its normal operation position is closed. You create the risk of the hose that's not even clamped on from factory to come loose from boost creating a boost/vacuum leak. You can just clamp both hoses on the EVAP solenoid but if for whatever reason the EVAP valve inside malfunctions and leaks somehow, you'll have a bad time.
Sent from my Pixel XL using Tapatalk
|
Did you just turn off the P0171 code in rom raider or is there another location to disable the evap CEL from happening?
I ended up connecting bypassing the evap solenoid with a single hose; you're suggesting that I cap both sides instead of leaving it open correct? IE cap under the manifold and at the hard line to the right.