Quote:
Originally Posted by Cycletech
It go's wrong after it saves my ECU info. I plugged in unit, turned ignition on(second stage with all dash lights on) Push read, go's through both read and downloading. Then instead of saying read complete turn off ignition it says turn off ignition and disconnect OFT. At this point I can no longer read or write.
|
Did you turn off the ignition, unplug the oft, then plug it in again to see if the write options are available? The vid was probably made with an early version of the software, and some of the GUIs and prompts may have changed. I think when I first set mine up it was a bit different.
Also, you said you deleted the file with the manager, but as I understand it, you should not be able to delete the original that it downloaded from the ECU. That gets stored permanently until you unmarry the oft from the car.