[gtpvette]

Well,, had to finish up the clutch master which I did. All seems to be good. It's 4 1/4" from the face that bolts to the firewall to the leading edge of the clevis. I opted to drill out the OEM clevis and weld in a 5/16 24 bolt. Everything seems to fit just right.


I've ordered some filler, primer and spray paint to cover the firewall where I've taken out the brace support.


I had thought I'd start on the motor mounts but opted to blow apart the wiring harness. I have a bunch of question for the guys that came before me,, but I'm short on time tonight.


Off to Las Vegas tomorrow for the Ron Fellows driving school. Thrashing someone else's Corvette for a few days sounds like lots of fun!!!