Quote:
Originally Posted by Doctordiode
I have a question. if I replace my 2013 frs engine with a 2016 frs engine. Because I spun a bearing will I have problems with the ecm. Is this something I should be able to do with out any compatability issues or these engines are too different. I would appreciate any advice from anyone. Thank you.
|
Somewhere in the forum, this has been discussed. The person swapping the newer motor had to turn off some CELs and some other things. The alternator and some other stuff is different and triggers a few CEL problems. I'll try and dig it up when I'm in front of a computer.
From what I recall he es able to swap the motor successfully with no major problems.