Quote:
Originally Posted by elijahcole92
Steve, thank you so much for the response! yes the car still started and read fine. Should i not save it in bin format? or is that okay?
I used ecuflash to make the changes in the rom. I'll try editing the .xml like you said and see if that fixes it!
Also is there a way to log the car without using the tactrix SD card setup? I found the OBD logging thread on romraider but the links are bad
|
Unfortunatly romraider logger never got sorted for these cars so only option with tactrix is sd card logging and you need to know ram addresses for the 2017 which i dont have, but you could ask the romraider guys.
The android torque app will do basic logging using a cheap elm327 but its no good for knock parameters and its refresh rate is to slow for tuning.
Other option is to buy brzedit or use techstream software , again techstrea is a bit slow refresh rate but it does have the iam and flkc knock parameters.
The other drama you will have is the 2017 is new logic for fueling and timing , especially fueling has more tables and some are not defined in the current K00C definition one that ecutek calls power afr is one you will need to efectivly tune