Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - Help

steve99 · 08-21-2017, 12:05 AM

Do you have an ecuflash definition in the correct ecuflash directory

How did you edit rom romraider or ecuflash

Did you select brz as the vehicle type ?? In ecuflash before flash

Does car srill start ??

Can you still read the ecu ??

You 100% cannot use boot mode flash method its only if you connsct to the serial interface by soldering an interface directly to ecu.

You must use oem flash method, if ghe oem icon is not active you have not open a valid rom to flash or your tactrix in not plugged into computer or is stuffed usually both read nad write icons will be grey if not tactrix
The error re padfing and unused areas is normail if saving in bin format.

08-21-2017, 12:05 AM	#2
steve99 Banned Join Date: Dec 2013 Drives: FT86 Location: Australia Posts: 7,996 Thanks: 1,035 Thanked 4,994 Times in 2,984 Posts Mentioned: 598 Post(s) Tagged: 2 Thread(s)	Do you have an ecuflash definition in the correct ecuflash directory How did you edit rom romraider or ecuflash Did you select brz as the vehicle type ?? In ecuflash before flash Does car srill start ?? Can you still read the ecu ?? You 100% cannot use boot mode flash method its only if you connsct to the serial interface by soldering an interface directly to ecu. You must use oem flash method, if ghe oem icon is not active you have not open a valid rom to flash or your tactrix in not plugged into computer or is stuffed usually both read nad write icons will be grey if not tactrix The error re padfing and unused areas is normail if saving in bin format. Last edited by steve99; 08-21-2017 at 01:10 AM.