|
Help - can't flash 2017 brz
Hello all,
I have a 2017 USDM 5mt brz (ZA1JK00C), i'm trying to flash the car using opensource/ecuflash. I have the xml and 32bitbase from TD-D, the car read the stock ecu just fine, but gave me this error when i tried to save it. "The rom image contains sections of invalid data which must be zero padded to make a contiguous file. It is possible upon subsequent loading of this file that you might flash over valid areas with these zeroed areas. Do you wish to continue?"
If i click yes it allows me to save the file. I saved it made another copied and made a few changes, tried to flash it and only had the option to write SHboot, i tried it and got this:
[16:33:34.630] J2534 API Version: 04.04
[16:33:34.630] J2534 DLL Version: 1.02.4798 Jun 13 2016 17:17:10
[16:33:34.630] Device Firmware Version: 1.16.4769
[16:33:34.630] Device Serial Number: TAh0RMVn
[16:33:52.027] sending bit rate sync bytes...
[16:33:53.713] no bit rate adjust response
[16:33:53.714] interface close
Can anyone help me out? I've tuned lots of wrx/sti but this is my first brz
|