Quote:
Originally Posted by drz400dude
I need to sandwich plate to have -10AN ports to feed oil to and from the cooler.
|
I don't think you can get all of that to fit on the same plane. It's pretty snug in there. That's why muckypuppy mentioned the trd adapter. The mocal kit comes with an adapter to raise it up about an inch so it clears the spill tray for the filter. You buy the mocal plate by itself and then use the TRD adapter to raise it.
There are other options. You can install your temp sensor in the front oil galley plug, or use an inline adapter. If you tell us what kind of sensor you have, I could show you more specifically what I mean. -10AN is pretty much the standard.