Quote:
Originally Posted by Christianb
That's weird. The person doing my alignment stated that when maxing the camber bolt at -2 degrees, the toe was at an unacceptable degree. He said that he had to align camber close to 0 to get my toe acceptable, and it wasnt even perfectly zero'd then. This is weird, because I'm not even one inch lowered in the rear, even though I wish to be at 1 inch lowered. Will troubleshoot with SPC and Fortune Auto via email tomorrow to try to resolve the issue. Any input is valued. Maybe install error? Anyone else have the same issue?
Thank you.
|
It sounds like your tech doesn't know how to adjust rear camber/toe on an 86, I've swung from -1.0 to -2.8 degrees on rear camber with the factory toe link and not had any troubles zeroing the toe.