Quote:
Originally Posted by steve99
as @ Kodename47 said those pi\di tables dont determine afr they just determine the amount of port and direct inection that used at any given time to achieve the required afr, afr determined by open loop or closed loop fueling tables.
Also one the rpm climbes over 5200 the ecu will just use the data in the 5200 row for any over 5200 . Ie st 6000 or 7000 if load is over
0.9 the ecu will use 20% port and 80% direct to achieve the desired afr |
Thank you Steve, so is it mean the bigger value at this table,the longer time to achieve target afr?