Quote:
Originally Posted by s4nd
can i edit the rpm value from 5200 change to 6000 or 6500? for help adding fuel at high rpm?
thank you
Sand
|
as @
Kodename47 said those pi\di tables dont determine afr they just determine the amount of port and direct inection that used at any given time to achieve the required afr, afr determined by open loop or closed loop fueling tables.
Also one the rpm climbes over 5200 the ecu will just use the data in the 5200 row for any over 5200 . Ie st 6000 or 7000 if load is over
0.9 the ecu will use 20% port and 80% direct to achieve the desired afr