|
I had my rear fenders rolled and flared slightly to accommodate 285/35/18 drag radials. I also tried to get the negative camber as small as possible to put more tire on the ground (currently at -0.5 in rear). Even with the rolled/flared fenders I still rub at the height I was at before. I raised the car slightly in the rear to compensate, but I might go -1.0 camber and put it back at the lower height.
Anything over 265/30/18 probably requires rear fender work unless at stock height. I doubt 295s would fit without custom fenders, especially when lowered. I'm guessing with 600whp you can probably spin 295s fairly easily anyways lol.
I can't really speak to the front fenders as I am only running a 245 width tire in the front.
__________________
STR also-ran
|