|
I'm not 100% sure what you're getting at here, but I imagine you're looking for some tips on installing this properly.
I would tackle this project by first removing the bumper.
From there, you've got to find a point to anchor it.
You could start by either finding a bolt that threads into the stock tow hook point, bolting it in, and threading it through the bumper hole. Then, I'd put painters tape on your tow hook cover cap thing, and dremel a slot in it.
If this sounds confusing or difficult, I wouldn't attempt this project.
__________________
SOLD: 2015 WRB BRZ Limited ('02 WRX BBS, S-04's, Stoptech Sport pads, MXP SP, AVO drop in filter, Mishimoto Intake tube, decatted header, OFT 93 Stage 2 EL Tune, Kartboy rear shifter bushing, Whiteline transmission and subframe lockout bushings, ST Coilovers, SPC Camber bolts w/smaller crash bolt, SPC LCA's & SPC Toe Arm bushings, Red TOMs, TRD Wing.)
|