Quote:
Originally Posted by steve99
happens whenever you reset ecu it looses all power or you reflash ecu with any tune system. Ecu learned parameters are reset to default values
|
The question is:
Can you CHANGE the ECU default values somehow so the learning is 'better' if you have a reflash or something like lose power from a battery disconnect for some reason?
__________________
Edelbrock SC kit w/ ECUtek tune, Oil Cooler, UEL catted header, Perrin 2.5 Overpipe n Catted midpipe, 3.0 Catback resonated (all exhst ceramic coated), TRD short shifter, MTEC clutch n trans springs, Trans: Pentosin MTF2, Diff: Motul 75W90, Whiteline trans bushing, 3/4" clutch slave cyl., Ferodo DS2500 pads w/Motul 600 fluid, 17x8 wheels n 235/45ZR-17 tires
|