Quote:
Originally Posted by armstrom
Do you have a datalog to share? If you have a display connected to your wideband are you seeing the lean condition reflected in the displayed values? Base maps are just a starting point. You should never drive normally (using full boost, heavy acceleration, etc...) until your tuner has had a chance to review the datalogs and made any fine adjustments.
-Matt
|
I do have data log, I will upload it in a bit from my last drive. My wideband does and doesn't reflect my lean condition. The lean condition is constant but visually not present on my wideband because my car is constantly compensating the fuel trim to prevent a lean condition. So to be exact, I am not "currently" running lean due to the fuel compensation but I throw the code because the compensation stays consistently high.
I have been going back and forth with my tuner and I have been staying out of boost and emailing datalogs. My tuner has made some adjustments but due to the fact that my fuel trims are so high, he can only do so much on his side until I find the reason for the lean condition.