Quote:
Originally Posted by Rakshaa
I'm interested in the front turn signal LEDs, however is there a way to have no constant glow (turned off completely) when the headlights are on? I only want them to be on when I use my turn signal, that's the one thing I want to fix on the front end of the car.
|
I have no idea. Maybe if you removed or covered on of the metal contacts.
For some signal lights there are 2 filaments and if you cover a contact that causes them to activate then you can prevent them from lighting up.
Usually I believe there is 1 power wire and 2 ground wires. Or something.
Long story short I have no idea if you can do that with these bulbs.
A wiring snip could be all you need to do. And at that point you can do that with a regular bulb.
Orrrrrr i believe if you buy a rear signal bulb and put it in the front that may work. I believe they are the same size. (in an frs at least)