HERE YOU ARE
ZA1JF00C i dont know if i work or not
Code:
<table name="Base Timing Idle (In-Gear)(Above Speed Threshold)" storageaddress="118EFC">
<table type="X Axis" storageaddress="118ECC" />
<table type="Y Axis" storageaddress="118EF4" />
Code:
<table type="3D" name="Base Timing Idle (In-Gear)(Above Speed Threshold)" category="Ignition Timing - Advance" storagetype="uint8" endian="big" sizex="10" sizey="2" userlevel="4">
<scaling units="Base Ignition Timing (degrees BTDC)" expression="(x*.3515625)-20" to_byte="(x+20)/.3515625" format="0.00" fineincrement=".2" coarseincrement="1" />
<table type="X Axis" name="Engine Speed" storagetype="float" endian="little" logparam="P8">
<scaling units="RPM" expression="x" to_byte="x" format="#" fineincrement="50" coarseincrement="100" />
</table>
<table type="Y Axis" name="Coolant Temperature" storagetype="float" endian="little" logparam="P2">
<scaling units="Degrees F" expression="x" to_byte="x" format="#" fineincrement="1" coarseincrement="5" />
</table>
<description>This is the base timing in idle mode when vehicle speed is greater than the 'Base Timing Idle Vehicle Speed Threshold' and transmission is not in neutral.</description>