Quote:
Originally Posted by Swivel
(Warning: loaded question ahead)
How do I go about making these corrections myself?
The idle ignition timing tables for my ZA1JD00C are a bit messy; the same that we've seen for B01C and others. I tried using basic math (calculating the differences between start/end of tables and axes), but they seem to differ quite a bit between the various definition files. Any chance I could get some help on this?
The definition file I'm using as a base for this is the latest from OFT. In the example below, I'm missing the X axis for the "Base Timing Idle (In-Gear)(Above Speed Threshold)" table.
D00C
700C
3D Definition contains the coolant temp like it's supposed to, but the storage address is not defined, and it seems like the Y axis is incorrectly defined as well.
2D and 3D Definitions in D00C
RomRaider with ZA1JD00C
|
Unless your prepared to learn how to reverse engineer the ecu code, its going to be much easier to just flash your D00C ecu with the B01C rom it will work fine and the defs for B01C are much better