Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

bhmax · 06-23-2017, 04:53 PM

There's 4 bolts that hold the main bracket to the shifter. Two had worked themselves completely out and the other two were loose. Replaced with hex head bolts, washers, and locktight to prevent that from happening again. Includes a cut up stock rubber boot to put between the base plate and chassis if you'd like to isolate it more. Also includes piece of foam to put under reverse button that eliminated some vibration.

06-23-2017, 04:53 PM	#2
bhmax Senior Member Join Date: May 2015 Drives: 13 BRZ, 17 Focus RS Location: AL Posts: 303 Thanks: 380 Thanked 98 Times in 70 Posts Mentioned: 2 Post(s)	There's 4 bolts that hold the main bracket to the shifter. Two had worked themselves completely out and the other two were loose. Replaced with hex head bolts, washers, and locktight to prevent that from happening again. Includes a cut up stock rubber boot to put between the base plate and chassis if you'd like to isolate it more. Also includes piece of foam to put under reverse button that eliminated some vibration. Attached Images Last edited by bhmax; 06-23-2017 at 05:16 PM.