06-23-2017, 01:32 PM
|
#17
|
|
Undisputed El Presidente
Join Date: Jun 2012
Drives: Zenki 37J ZN6
Location: Stockton, CA
Posts: 11,593
Thanks: 9,403
Thanked 9,411 Times in 5,270 Posts
Mentioned: 374 Post(s)
Tagged: 33 Thread(s)
|
Quote:
Originally Posted by Azzudien
Having trouble posting picture, so basically I put in some camber bolts on the 2017 PP car to get a little - camber, car is completely stock otherwise on the suspension.
Went to get alignment this morning, and guy that owns the shop turns out to be a regular on HPDE days and knew exactly what I was looking to do.
Both of us where surprised when he put it on the machine and the rears out of the factory already had -1.4 camber. I was under the impression stock alignments and zero negative camber rear? He was actually able to get the rears to -1.7. Fronts unfortunately we could only get to -1.4 with just the camber bolts.
So current alignment, stock suspension with whiteline camber bolts.
Left front Right Front
-1.4 Camber -1.4
5.7 Caster 5.8
.01 Toe .02
Left Rear
-1.7 Camber -1.7
.08 Toe .06
|
Camber options galore (cheap to $$$)
http://www.ft86club.com/forums/showthread.php?t=103609
__________________
 
"Just like how a strut bar somehow enables you to corner 20MPH faster around a cloverleaf on-ramp, when the reality is, you can do it already but you just don't have to balls to do it." - CSG David |
|
|