Quote:
Originally Posted by WRX4ME
Can you elaborate on that a little? Trying to understand what is occurring.
Thanks
|
Yea so the charger system is a 3 piece drive it has a drive stub that has the dowels for the oil pump and it threads into a cap that threads to the outer casing that spins the proprietary system .....
so if you look up at the pics I have posted before the cap is stripped off of the drive part of the charger ......it just spins without actually spinning the proprietary system.
They used very thin material which allows it to expand and contract which is never good with threads so I have a piece that is much thicker where the threads are so it doesn't expand and it will be heat treated to avoid that as much as possible and it's also dynamic balanced so it won't vibrate!
Sent from my iPhone using Tapatalk