Ok... so this is what I've been up to...
I have to install to see if my adjustment on the pull cord is good. Uninstalled, the mod works great. I've yet to modify the driver side.
Also, I still have to make and upholster the cover... that should be the easy part.
I did at least couple things different than what I saw on the net with this mod. One was that I kept the spring; and two, I used a keeper pin to anchor the pull cord on the spring side.
Detailed write-up coming soon...
__________________________________________
projekt zeal86 build
zeal.eightsix Facebook
Instagram @zeal.eightsix