Quote:
Originally Posted by steve99
With tactrix just do a READ of ecu. After read is completed ecuflash will probably throw up a window saying unknown rom type.
Just save rom as srf or as a bin does not rearly matter as you can convert.
Tactrix wont let you write unless you make up a dummy def file for writing so no chance of harming ecu.
If you use save as function and save as a BIN file (it will thow another warning about lost data dont worry just click yes to save.
Then you will be able to read that bin file with romraider if its a K00G rom
If hour friend wants to write/tune his car i can convert the romraider def to a ecuflash def if you want
|
Thanks a lot.
It leads to another question that I'm curious about. When I started out tuning, I was adviced never to modify and reflash my stock rom. Not that I ever wanted to do that, but were there a specific reason for that advice?
E.g. if I already had A01G on my car, would there be a difference between an A01G pulled directly off a car and e.g. an OFT A01G in the areas not defined?