Quote:
Originally Posted by ZDan
Clutch-type biases torque IMMEDIATELY also, and starts from a positive value instead of zero.
Torque bias of a clutch type starts at a positive value because of the breakaway torque. How much steeper it gets is dependent on tunable factors like ramp angle, active clutch plates, and in the case of the OS Giken I got for the FD, preload springs. I had mine specifically tuned to have minimal breakaway torque and a shallow slope to avoid rapidly increasing lockup with torque.
|
Understood. I'm not disagreeing with you. Fact remains they slip until the ideal designed in clutch pack load is achieved. Torsen cannot and do not ever slip.