|
I'll be installing an oil pressure and oil temp gauge from the stock locations under the oil filter, just going to remove the stock sensor units and install the new sending units that come with the gauges. Like someone said earlier the stock oil pressure is 1/8 BSPT, I imagine the oil temp threading is the same. I got 2 1/8 BSPT male to 1/8 NPT female for the new sending units. As soon as I am done I will report back and try and post pictures. It's possible a CEL may come on from removing the oil temp plug as I think it's 4 wires not just the 1 like the pressure sensor. If i get a light I'll just tap temp from the plug on top of the block
|