Quote:
Originally Posted by subtledriver
OK, so I looked at my crushed headlights. The pointy side of the brz headlight has a rubber "support/seal" that supports the bumper. If you remove it, you get the full, long, pointy FRS look. So I'm confident It will fit just fine without modifications (besides maybe adding the little rubber part to the tip)
you can see the rubber part on the tip here.
http://blog.86speed.com/wp-content/u...dlight-BRZ.jpg |
As someone with an 86 who swapped in brz lights I can tell you they're itentical in shape, mount and fit. The little rubber gasket is just a bumper filler to seal the panel gap to the front bumper. It peels off and can easily be attached to gts/frs/spec d headlights to fill in that gap if you're installing them with the standard BRZ front bar.