|
I haven't used the NX plate kit but if I was still going Nitrous, I would be using it.
Make sure you run a window switch as a lot of people have said. I'd run a window switch and throttle position sensor through an auxiliary control module such as the Garage 7 IPC unit.
I'd honestly go a little higher than 50hp shot. It's easy enough to do, and you'll NEED to log AFR when you're hitting nitrous to make sure your kit is adding enough/not too much fuel with the nitrous. Changing spark plugs would be the hardest job. Maybe reduce timing by 2 deg on WOT. I'd be running a different map for Nitrous on EcuTek.
Properly set up nitrous isn't cheap. Window switch, pressure gauge, purge system, wiring, bottle heater. All are essential for a safe running Nitrous system and all will run you quite high in price.
|