Quote:
Originally Posted by number_Un0
sorry, should have made that clear. The wheel is a 17x9
|
This thread is pretty much mandatory reading as far as I'm concerned.
http://www.ft86club.com/forums/showthread.php?t=32719
Koni yellows are OE replacements, there should not be a significant difference between them and OE. You may need 3mm or 5mm spacers to get it to clear, could be harder if you're adding camber via camber bolts. Lots of pictures and feedback in that thread about how those wheels clear stock suspension but ultimately there's enough variance to not give a definitive answer.
I use 5mm spacers on mine to prevent rubbing at full lock (fender lining for me, not tie rod, lots of camber, I have coilovers and extended studs).