Quote:
Originally Posted by UncleFester
Thanks for the guide it helped me install my 6k kit today.
I'm very pleased, looks better than I thought it would. I opted to remove the halogen drl's and high beams altogether.
Couple of notes from my install.
1. I used a 7mm deep socket instead of 9/32 for the bracket nuts.
2. I mounted the ballasts to the frame with 3m mounting tape, instead of using the provided brackets.
3. Marker lights are easy if you find the silver press clips with a screwdriver. Bottom first and then side, makes them come right out.
I took some pictures and I will try to upload them tomorrow.
|
Thanks! I updated the DIY with the socket size. I was able to just pry the marker lights diagonally, and luckily I didnt break anything. I was nervous though.
Im heading outside in a few to re-aim the headlights and take some output shots. I should be able to update post #2 in a few hours.