Thanks for the guide it helped me install my 6k kit today.
I'm very pleased, looks better than I thought it would. I opted to remove the halogen drl's and high beams altogether.
Couple of notes from my install.
1. I used a 7mm deep socket instead of 9/32 for the bracket nuts.
2. I mounted the ballasts to the frame with 3m mounting tape, instead of using the provided brackets.
3. Marker lights are easy if you find the silver press clips with a screwdriver. Bottom first and then side, makes them come right out.
Location I mounted the ballasts with tape.
Picture of the lights side by side.
Picture of the wiring.
A not so great picture of my lights. I will have to take another with a better camera.
