Quote:
Originally Posted by dillanp86
Hello experts!
So I recently bought a set of gramlights 57xtreme 18x9.5 square. Running 255/35/18 and I'm am RS1 so I got the TRD lowering springs.
I learned from the previous owner of the wheels that'll I'll need 5mm spacers for the front two wheels. I just ordered them, along with some Cuzco camber plates. The previous owner sent some spacers with the wheels but they weren't hub centric, long story short, I get a strong vibration whenever going north of 75mph. I'm hoping the new spacers with the new bolts will solve that. Main question is what else should be causing the vibration, along with what degree of camber for the front and rear? Rear LCA are coming soon hopefully..
Ps: previous owner of wheels also just had them rebalanced before shipping.
Sent from my iPhone using Tapatalk
|
More info needed.
Offset? Double check lug nuts. Find out where vibration is coming from and swap out wheel to another corner.
Why would previous owner rebalance them them before shipping? Sounds fishy. He possibly couldn't get them to balance and god rid of them. I'd rebalance them.
When was the last time you had an alignment? was the before or after the springs? I'd get an alignment.
Spacers, hubcentric or not won't matter as long as you tighten correctly.