Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - Pure Motorsport: JDL Turbo BRZ Track Build

ATL BRZ · 05-10-2017, 01:37 AM

Installed the turbo kit along with the fuel injectors, AOS, and my modified oil cooler kit over the weekend!

Still to-do:
Install Walbro 485 fuel pump kit
Install new over/front pipe thats on the way from JDL. My prototype 1-piece didn't fit well.
Add engine oil and prime turbo
Re-install fuel pump fuse and run the car on the HRI Tuning startup/leakdown map and adjust BOV to allow a smooth idle.
Re-install bumper and drill and tap the crash beam to fit the Velox splitter support rods.
Break in clutch.
Load test and log to finish etuning with James.

05-10-2017, 01:37 AM	#1873
ATL BRZ TEQSPORT Brand Manager Join Date: Jun 2012 Drives: '24 GR86 + '16 FR-S Location: Atlanta Posts: 3,666 Thanks: 3,725 Thanked 4,137 Times in 1,707 Posts Mentioned: 90 Post(s) Tagged: 6 Thread(s)	Installed the turbo kit along with the fuel injectors, AOS, and my modified oil cooler kit over the weekend! Still to-do: Install Walbro 485 fuel pump kit Install new over/front pipe thats on the way from JDL. My prototype 1-piece didn't fit well. Add engine oil and prime turbo Re-install fuel pump fuse and run the car on the HRI Tuning startup/leakdown map and adjust BOV to allow a smooth idle. Re-install bumper and drill and tap the crash beam to fit the Velox splitter support rods. Break in clutch. Load test and log to finish etuning with James. Last edited by ATL BRZ; 05-10-2017 at 01:47 AM.