Your board looks exactly like mine, so I'm guessing you got the v2 'V' bar as well. I have a 2015 FRS and for the damn life of me, I can't get the center triangle to flash when the car is on, only when it's off. Is there anything I'm doing wrong or wiring up wrong? All help would be greatly appreciated.
Quote:
Originally Posted by tato.valverde
The OP in this thread basically switched up the Brake and Running wires that go outside the lamp assembly and tapped into the car.
The red wire was always intended to be the brake wire, and is used as a running light instead, and the blue wire was intended to be the running light, and is used as a brake light instead.
I'm not sure about the S shaped ground cable though...
Anyhow, I finally did my wiring this weekend to have a separate Fog Light switch, and it works like a dream =) I still need to install it on the car though, it's cold here in Chicago...
Attachment 146640 |