Quote:
Originally Posted by Chumblebee
Anyone running an ebcs with the kit? I've been looking into getting one before install. Any help appreciated. Thanks!
|
I've got the Infamous EBCS. Super simple setup too.
Bolt it to the back of the intake manifold with the supplied hardware and use the evap solenoid's connector for power.
"Wiring" it with vacuum lines is also dead simple. I only have two lines going to it. Reference from the compressor side goes to port 3, and wastegate goes to port 2, I think. I would need to look at mine to confirm, but there are "wiring" diagrams out there that are easy to understand.