I've upgraded my fuel system, so I no longer need this setup. It has worked flawlessly for the past 3500 miles controlled via my standalone ecu.
$250 + ship
What you get:
Everything you would get if you ordered the FBM 485 Kit (Pump, billet ring/o-ring, billet pump holder, 1:1 reg, etc.)
OEM fuel basket with fbm 1:1 regulator installed, hanger modified for return line(-6), quick release to -8 fitting, -8 adapter fitting.
It is setup for return line so if you dont have a return line setup, simply cap the -6 return fitting. Also, if you have stock fuel feed lines you can remove the quick disconnect fitting and your stock line will connect as normal.
* you will need to transfer your rubber hanger/tank seal, fuel level sensor(single release tab), and plastic venturi line lock.
** recommend buying a new fuel sock, just because it's right there/easy to do.
