Alright guys, maybe you remember maybe you don't, I put a post here back in January, I'm assuming mods deleted it....but any way.
As promised, my engine is finally here from overseas.
As you guys can see, the crate has been opened up and the engine thoroughly checked at my local shop. The engine is in mint condition, and it only has 3000 miles on it. Below there is a list of all the things that come with the engine. It is not just a bare bones engine, it comes with many of the componentry that our engine will need to be able to run, as well as a couple of upgrades. It also comes with the EcuTek license already installed in the Ecu, and that alone is like $300+ of value.
The engine was always ran Naturally aspirated, never boosted. And actually if you see my most recent posted threads, all those parts that I sold were parts that were installed on this same engine.
List of all components attached to the engine:
Complete long block assembly
Crank angle plate
Intake manifold, fuel injectors and throttle body
Alternator
A/C compressor
Wiring harshness and all sensors
Front and rear O2 sensors
Starter
Complete hi pressure fuel system and fuel system computer
Engine mounts
Aftermarket Light Weight Pulley kit
OEM pulleys (included as spare parts)
Water pump and water neck
Thermostat
Spark plugs
Ignition coil packs
Crawford Power Blocks
Complete clutch kit with flywheel
The is one thing missing, and that is the oil measuring stick, when we opened the crate it wasn't there, but I'm sure you can get one for around 15 bucks.
The way I want to go about it is, I will not set a fixed price, but I'll be taking offers.
So bring your offers on!
