Quote:
Originally Posted by Jhangles
So I've searched the forums, and haven't found this exact error yet...
I was marrying the OFT I bought from FT986SpeedFactory, and after reading my ECU, it saves it, then says "Preparing Tuning Files", then after a few seconds, I get what I assume to be an error window that's imposed over the "Preparing Tuning Files" window. It just says "4014ZA1JB00C" with a unlabeled button under it.
I tried waiting and it just stays there, and I've pushed the button. When I push it a new window appears that just says "6014" with a couple progress bars under it.
After that finishes, I get a window that just says "6007", with another unlabeled button. I push it and I get the page that has the "Tuning" etc category icons, but they are no longer labeled, it's just the icons.
When I go into Tuning, the Read and Write icons are grayed out.
All the updates for the tablet were applied through the PC program, and I even unmarried it and tried it again. Then I thought that maybe my battery was weak so I drove the car around the block and still same results.
Is there a way to see if the previous owner put a different tune on the car or something, or am I just screwed? =(
|
Sounds kike the onboard tune file database is corrupted.
Marry up the tablet ie read in your stock tune.
Then go to diagnistics or ecu info and confirm your rom calid likely za1jb00c .
Then go to oft website download tunes abd load up correct tunes into tabket with openflash manager