Quote:
Originally Posted by Shims
Guys I really need some help on the offset or size on;
Work Meister S1 3P
front: 18x8.5 +37 R disk (45mm lip)
rear: 18x9.5 +37 O disk (83mm lip)
not sure what offset I need to get it flush without poke, tucking, or camber
I'm trying to match my TE37SL Black Editions which were 18x8.5+35 front, 18x9.5+40 rear
|
I guess you were happy with the TE37SL fittment?
If so, the Work Meister Setup you've posted above will differ from the TE37SL fittment as follows:
Front -> Work wheels will be 2mm more "inside"
Rear -> Work wheels will be 3mm more "outside"
So nothing wrong with the figures you've posted with the work meister wheels. If you did like the TE37SL fittment, you will like the Work fittment (I doubt you will notice the 2-3mm difference once their are mounted)
hope this helps. Cheers