|
I used the term "splice" loosely here. I just mean to get the electrical signal for the turn signal somehow. Whether that is cutting, T-tapping, or an adapter that is up to you.
The FRS uses a 7443 combination turn/parking bulb and the socket has 3 wires; one for ground, one for parking, and one for the turn signal. Where as most replaceable bulb fog setups will use an H11, 9005, 9006, plus a few more.
I would probably look for an adapter, 7443 on one side and a socket to fit what ever bulb/fog light on the other. This way it is really just plug and play as far as the electricals go.
If you check out the video for the OEM fogs on ft86speedfactory.com it will show you the mounting and it will give you and idea of what to look for in a fog light housing.
|